Radius Glue-In-Bolt Installatietool SDS Veiligheidsinformatieblad

Radius Lijm-In-Bolt Installatie Tool SDS: Snel, Sterk, Simpel. Fixeer met Vertrouwen!

Stel je voor: de geur van versgebakken appeltaart, de warmte van een knusse avond bij de open haard, en dat allemaal in één ongelooflijk item. Dit is geen gewoon ding, dit is een portaal naar pure gezelligheid, een kus van de zon op je huid, een geheim fluisteren van de wind. Durf te dromen, durf te voelen, durf te bezitten. Laat je verrassen en ontdek de magie die in dit pareltje schuilt. Mis het niet, het roept jouw naam!

€13.90 €27.80

Aantal:

Beschrijving

Using a hammer drill, it allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst.

Aluminium anchor chamber.
Stainless steel drill attachment point.
SDS PLUS shank in extra-strong carbon steel.

Use

After drilling the hole in the rock following 'Method B' for resin anchors, insert the appropriate glass phial.
After removing the spiral drill bit from the drill, fix a standard SDS PLUS drill bit and insert this into the placement device.
Then insert the desired anchor into the hole with the phial. Strike the anchor lightly with a hammer to break the resin phial.
Now fix the placement device over the head of the anchor, and, ensuring that the drill is exactly in line with the hole, slowly begin to rotate the drill spindle using the trigger switch.
It is important to start the rotation slowly but even more imperative that it remain exactly in line with the hole. At this point, increase the drill’s rotations.
The anchor will be quickly and effortlessly fixed in place.
Turn off the drill and immediately turn the anchor in the direction of the load.
A small amount of resin will escape around the edges of the hole; ensure that this is spread evenly around the edges so as to prevent any future water from getting in.
The anchor is now perfectly placed.

Total device weight: 87 gr